How to do lamination?
The surface to be protected must be dry and clean (no dust, oil, etc.)
Lamination temperature +10 to +30°C (also applies to the material to be protected).
How to choose adhesive level?
The adhesive level depends on the material to be protected and the lamination method, etc.
How to storage?
Surface protected materials must be stored in a dry place at a temperature between +10 and +30°C.
Prolonged high temperatures (such as when in direct sunlight) will increase the adhesive level.
Prolonged wet conditions – such as rain or condensation – will alter the adhesive level (if it comes between the material and the film).
The above factors may make the film more difficult to remove and increase the risk of adhesive residues.
When to removing the protective film?
The film should be removed as soon as possible after the protected material is installed. Removal temperature: -20 to +40°C. The maximum protection period is 6 months.
How to store protective film roll
Must be stored in a dry and dust-free area out of direct sunlight.
Storage temperature: +10 to +30°C, maximum storage time: 6 months following production.
Note
Protective films must be tested before use. We cannot guarantee the accuracy of the above information in all circumstances, which is correct according to our current knowledge and experience.
